OneLauncher NonPrescriber

OneLauncher NonPrescriber

Information within this training package is colour coded:  

Blue is for information and includes hints and tips                                                                                                                                                                                                                                                            
Orange is an action that is required                                                                                                                                                                                                                                                                                    
Yellow is resource that you can use to send internal communications to others within your practice                                                                                                                                                                         
Red is a key message that must not be forgotten or ignored                                                                                                                                                                                                                                          

Introduction

The OneLauncher NonPrescriber tool brings together all of the tools that are relevant for NonPrescribers into one easy place so you can easily locate and use the powerful tools that we've created for you.  As further tools are developed, these will be added to the Launchers.  This guide takes you through the tools in detail.
If you haven't already watched the OneLauncher NonPrescriber video we would suggest you watch this before going any further:                                                                                                                        

OneTemplate NonPrescriber

This is a dynamic template for managing chronic disease - so only things that are relevant to the patient you have in front of you are displayed.  For example, if the patient is diabetic the diabetes section will show; if they aren't it won't.  

It's so smart - examples (just a few of the many):                                                                                                                                                                                                                                                            
  1. If a diabetic patient is on injectables there is a section to check injection sites, if not there isn't
  2. Depending on smoking status different length and detail of information is shown (smokers lots, smokers with COPD even more, never smoked very little shown)
  3. At the top of the COPD page the template automatically tells you what GOLD classification the patient is and what ABCD group they fall into
  4. If a diabetic patient is on drugs that cause hypos there's a hypos awareness section which shows, if not then it doesn't
  5. If a patient needs contraceptive advice and is under 16 then competency assessment questions are shown, if they are older then they don't

Introduction Page

The first section of this looks the same for every patient opened and has some information about the colour coding used within the template as well as links to our support site and to add development requests for future versions of the template:

If you have our enhanced package then any locally commissioned services are highlighted in purple within the template                                                                                                                                         
Where there are important safety considerations, these are shown below the template guide, for example where a patient is on medications that mean they need notifying about sick day rules (and this hasn't been done in the last 12 months) the following box shows (if they have been told already it doesn't):


QOF

When dealing with QOF there are two pages that show you different information:
Relevant QOF disease areas: This shows you every QOF area that the patient is in and all of the elements of care needed for that QOF area - so that you can see what has been done and re-do everything if you want.  If you have patients with singular diseases (e.g. just asthma) this is quite easy to digest and you can immediately see what you need to.  If you have patients who have multimorbidity this can get a lot busier and it can be more difficult to separate what's needed from what's not
A simple patient with relevant QOF disease areas:                                                                                                                                                                                                                                                               

A more complex patient with Relevant QOF disease areas:                                                                                                                                                                                                                                              



This is why we have the second QOF page: QOF Outstanding.  This just shows you what's outstanding for this QOF year.  So if we take the same patient as above, you can see that this makes it much easier to hone in on what needs doing:

Earlier in the year the "relevant QOF disease areas" tends to be more useful, because you can go through and tick off the things that need doing.  Later in the year when you're just trying to mop up remaining QOF points the "QOF Outstanding" comes into it's own so you can just see what needs doing to finish up for QOF.
Don't forget all of this information is also in an easily digestible form in the OneMonitoring tool                                                                                                                                                                                    

Shared elements

Where a patient has multiple diseases where the same elements of care are needed (e.g. BP needed for both hypertension and CHD) these elements are pulled into the "Shared elements" page of the template:

Notice the level of detail in the information provided about the appropriate blood pressure targets which are patient specific and also highlighting whether or not these have been achieved.  This kind of information allows for the devolvement of care to other team members - as everybody is clear what the targets for treatment are.
Where shared elements exist, these elements of care are removed from the disease areas - so in the example above the hypertension and CHD pages would both show but neither would have BP in them - this would be in the "Shared elements" page.  There are red alerts to the need to look at the shared elements page where this is relevant for patients in each of the individual disease areas:

Individual disease area pages

These will show up if appropriate for the patient you are reviewing.  As highlighted earlier each of the elements within the pages are also highly dynamic, we try to provide gold standard information which strikes a reasonable balance between giving the user enough relevant information, but also not being overwhelming.  As with any change, some local discussion will be needed about how the tools are utilised and what the expectations are about how much information is completed versus the appointment duration given.  Where our tools have been shown to have the maximum impact, they have been supported by funded schemes to account for the work required.  
Wherever possible we provide information which you can copy and paste to AccuRx to make sure the patient remembers key information                                                                                                           
For example:

and: 


OneTemplate Acute

This template aids data entry for the commonest consultation types in Primary Care.  It can be especially useful for trainees, allied health professionals or even established GPs who just want a structured and evidence based way of recording data.  For each of the areas covered we've scoured the available evidence so you can be sure you're entering everything that would be expected for that particular complaint, highlighting red flags (and giving you preformatted text to record their absence) and seeing the latest guidance on how to manage the presenting condition.  As the evidence evolves, we add this in to the template so you don't have to.  In this way, you can be sure that you and everybody else in the practice is working to a high quality standard when consulting.

As with our other templates this one is highly dynamic - for example:
  1. If a child is being seen the febrile child template is shown as are details about who is accompanying/caring for the child
  2. If a smoker has a sore throat the higher risk is highlighted to the user
  3. For NEWS score things like immunosuppression or COPD are highlighted to the user as key risks
  4. If diabetic the risk of malignant otitis externa is highlighted in the Earache page
  5. If the patient is presenting with chest pain and has pre-existing IHD this is flagged
These are just a few examples - there are far too many to list here.                                                                                                                                                                                                                              

OneRemote

During COVID we have developed a number of resources to help practices.  OneRemote is one of the tools we've shared for free to all and is a consultation template both for SystmOne and EMIS – giving not only COVID advice but also guidance on remote consultations with end of life, shielding status and the ethical considerations framework (developed by Sheffield’s Palliative Care Lead, Dr Sarah Mitchell) all built in
The full list of resources available is:
  1. A COVID19 hub on our website with over 400 resources to help practices/care homes/anybody else manage with COVID – this has been commended by NHSE Medical director and has also featured in the nationwide LMCs communications and has received over 40000 hits in the first month
  2. A free tool for both SystmOne and EMIS to code and communicate shielding or non-shielding status to patients
  3. A free Form 4 for cremation for both SystmOne and EMIS which pulls through the information entered into the remote consultation template
  4. A free protocol for reception staff to help manage risk assessing patients who come into the surgery
  5. A free notification of diseases form (again for S1 and EMIS) for patients who have suspected COVID.

OneCalculator

This has all the clinical calculators you could need in one place:
  1. Cockroft Gault
  2. CHADs2VASC
  3. HASBLED
  4. ABCD2
  5. CRB65
  6. QRISK2
  7. Spirometry
  8. Wells score
  9. FeverPAIN
  10. Marburg
  11. NAFLD
  12. ACB

Disease review panel

Stroke

This information panel gives you a lot of useful information when reviewing patients who have had a stroke - see below:

Diabetes

This information panel brings together all the information you need to think about when conducting a diabetic review.  It can be really helpful to look at before undertaking a review.  Where targets are not being hit this is highlighted to the user:

COPD

This protocol gives the user interpretation of the last spirometry and also wider information about COPD; bringing together information that is useful to the clinician in management of COPD:

Spirometry interpretation:


Whilst every effort is made to ensure accuracy, the use of codes varies widely, depending on spirometer, software and convention and as such the clinician is ultimately responsible for interpretation of spirometry and appropriate management of the patient.

Respiratory history

This can be massively useful to review before undertaking a COPD review:


Care plans

If you're not autolaunching the care plans after using the OneTemplate then you can access them from the OneLauncher manually.  Make sure you save a consultation with any new data in it before launching the appropriate care plan.  If you have an interest in multimorbidity and want to use our new pilot multimorbidity section in the OneTemplate and associated multimorbidity care plan then speak to your customer relationship manager.
  1. Asthma (Adult)
  2. Asthma (Child)
  3. COPD
  4. Mental Health
  5. Dementia


    • Related Articles

    • OneLauncher Prescriber

      Information within this training package is colour coded:   Blue is for information and includes hints and tips                                                                                                                                            ...
    • Why does EMIS hold when I first load the OneLauncher?

      Some users may experience a pause when they load the OneLaunchers for the first time after logging into EMIS Web. Our development team have noted that when loading the OneLauncher for the first time (each day) after logging into EMIS Web, it hangs ...
    • OneTemplate NonPrescriber

      Introduction This is a dynamic template for managing chronic disease - so only things that are relevant to the patient you have in front of you are displayed.  For example, if the patient is diabetic the diabetes section will show; if they aren't it ...
    • Adding OneLaunchers to the Protocol Launcher (F12) and using them

      Information within this training package is colour coded:   Blue is for information and includes hints and tips                                                                                                                                            ...
    • Problems with loading templates

      A number of practices have highlighted to us that they are having issues with loading templates within EMIS.  As with most complex problems, there is a swiss cheese cause to many of the issues that occur.  In this article we're going to highlight the ...